LSA Supercharger Spacer Plate Kit
LSA Supercharger Spacer Plates
LSX Performance Parts proudly supplies the largest range of high performance upgrades to suit the LSA Engine Range.
Almost a decade of research and development has shown the LSA engine combination to one of the most capable engines on the market.
However the LSA design faults definitely leave a lot of horsepower & efficiency on the table.
Our range of LSA Spacer plates are designed to improve Air Flow, Supercharger plenum volume and horsepower.
What Does An LSA Supercharger Spacer Plate Do?
It's no secret that positive displacement superchargers suffer from heat soak.
This is caused from the supercharger being placed directly on the cylinder heads in the valley where majority of heat is generated due to heat rising.
Pair that with the heat generated from compressing air and forcing into the engine and you basically have a heater strapped to the motor.
Now the LSA Supercharger tends to suffer a little more than aftermarket blowers due to the fact that they can create huge amounts of boost however only have a small intercooler compared to others.
This is what causes the LSA blower to run quite hot after back to back high rpm pulls.
The point of the LSA Supercharger Spacer Plates is to raise the supercharger off the cylinder heads by separating them with a thermal reduction plate.
This shows significant decreases in intake air temperatures as you are eliminating heat soak effectively allowing the engine to make more power and run cooler.
What Results Should You Expect From LSA Supercharger Spacer Plates?
The LSA Lid Spacer has been tried & tested by not only in-house but also many independent workshops who have all seen a significant drop in intake air temperatures which offers a huge reliability gain allowing your engine to make more horsepower and run a lot cooler!
The Result? A consistent gain of around 15-20 rear wheel horsepower.
What's Included In Your LSA Lid Spacer Kit?
- 2 x LSA Supercharger Spacer Plates (5mm Thickness)
- 1 x Supercharger Heat Shield
- 1 x Extended Bolts Set
- 1 x Sealant
Note: Suits rectangle port heads only.
Want Some Assistance With Your LSA Upgrades?
Sure! Give us a call on (03)8595 4343 OR Simply click Get In Touch & schedule a time that best suits you. We will have one of our sales consultants contact you at your convenience.
Alternatively, We are available for Live Chat right now!
Shop with confidence with free freight Australia wide & discounted pricing.